It is one of the best-selling bicycle helmets on the market: the Mythos 3.0. A fit proven millions of times and an outstanding price/performance ratio have made it a bestseller. The low weight of the helmet is due to the Inmold production, where the upper shell is thermally connected to the Hi-EPS. This results in a firm surface connection, which is responsible for a very stable construction. The tail and the temples are pulled further down for optimum safety in the terrain. The result is an even larger head cover. With the Ergo Plus Run System, which is combined with the height-adjustable Custom Fit, the helmet can be perfectly adapted to the head. A further plus for comfort: the removable, antibacterial padding. Fly screens keep insects away from the head, the shield guarantees optimum protection in the field of vision. The lower edge of the helmet is protected by the Edge Protect polycarbonate shell.
Run System Ergo Plus
The Run System allows the size of all Alpina helmets to be individually adjusted using a smooth-running rotating wheel. The high-quality Run System Ergo+ has two large wing-shaped headrests, which ensure high wearing comfort. The difference to the Run System Ergo Pro: the headrests are not rubberized.
A helmet can only provide the best possible protection if it remains in the optimum position in the event of an impact. The adjustment and fixation of the two straps under the ear plays a decisive role. The Y-Clip system guarantees millimetre-precise adjustment - in a matter of seconds.
Edge Protect is an additional polycarbonate sheet that refines Inmold helmets. It covers edges on the underside of the helmet. This protects the Hi-EPS and increases the longevity of the helmet. At the same time, the neck and shoulder area of the rider is protected against injuries from the helmet in the event of an impact and contact with the lower edge of the helmet.
Proven hundreds of thousands of times and used on all Alpina helmets: the belt buckle with the red push button and multi-stage automatic snap-in mechanism. Ergomatic can be operated with one hand - you can loosen the strap uphill, tighten it downhill - and in the event of a fall it is not possible for the locking mechanism to open automatically.
Custom Fit is an adjustment system at the back of the head that allows you to adjust the height of the Run System in several stages. This allows the optimum fit of the helmet to be adjusted for a wide range of head shapes. Pressure points are a thing of the past, the fit of the helmet is perfect and safety is increased.
One factor that strongly influences the wearing comfort is the ventilation of the helmet. The strategically sensible arrangement of the ventilation openings is decisive for optimum ventilation of the interior. The air is directed into the interior, directed along the head and can then flow out again at the rear. The head is therefore always pleasantly air-conditioned.
The inner shell of all Alpina helmets is made of Hi-EPS (High Expanded Polystyrol). The material has microscopically small air chambers which absorb the forces acting on the helmet in the event of an impact. Hi-EPS provides optimum protection and at the same time enables extra-thin wall thicknesses and narrow helmet shapes.
In the Inmold production process, the polycarbonate helmet shell is thermally bonded to the Hi-EPS inner shell of the helmet body under great heat and pressure. This creates a large-area and inseparable connection between the upper and lower shell. Advantage: The helmet is very light and at the same time extremely stable.
All Alpina helmets manufactured using the Inmold process receive a robust Ceramic Shell. A polycarbonate plate is stretched under high heat onto the shape of the later helmet and pressed under high pressure onto the Hi-EPS body and thermally connected to it. The Ceramic Shell is characterized by several qualities: It is break- and scratch-resistant, UV-stable and antistatic.